Improving the durability of polyester geotextiles with fluoropolymer/bitum organic coatings in application of coast protecting construction

17 views

Authors

  • Tran Phuong Chien (Corresponding Author) Institute for Tropical Technology and Environmental Protection, Academy of Military Science and Technology
  • Nguyen Dinh Chinh Institute for Tropical Technology and Environmental Protection, Academy of Military Science and Technology
  • Nguyen Van Dung Institute for Tropical Technology and Environmental Protection, Academy of Military Science and Technology
  • Nguyen Dai Thang People's Committee of Ba Tri District
  • Bui Thanh Duong People's Committee of Ba Tri District
  • Dinh Van Duy Can Tho University
  • Pham Trung Vietnam Academy for Water Resources

DOI:

https://doi.org/10.54939/1859-1043.j.mst.94.2024.78-85

Keywords:

UV durable coating; Geotextile; Embankments to reduce waves.

Abstract

This study aims to manufacture and test protective coatings for polyester geotextiles (DKT) to enhance fabric durability and application in building soft embankments to reduce waves to protect the sea. The coating was made from Fluoropolymer/bitumen/cashew oil polymer matrix, UV resistant additives and some other additives. The manufactured coating satisfied the requirements for adhesion, increased mechanical properties and environmental durability for polyester DKT fabric. Mechanical properties were determined by measuring tensile strength. The physico-chemical properties of the coating were tested through TGA/DSC and FTIR analysis methods. Environmental durability was determined by the QUV test method of 2000 hours with a cycle of 4 hours of UV irradiation and 4 hours of mist spraying. Research had established the optimal coating formulation. Test results also showed that the coating helps polyester ĐKT fabric increase physical and mechanical properties by 27% and environmental durability by 30%.

References

[1]. James Gardiner, “Fluoropolymers: Origin, Production, and Industrial and Commercial Applications”, Aust. J. Chem, (2015). DOI: https://doi.org/10.1071/CH14165

[2]. M. Yamabe, “Fluoropolymer Coatings”, Organofluorine Chemistry, 397 (1994). DOI: https://doi.org/10.1007/978-1-4899-1202-2_18

[3]. Fluoropolymer Market by Type (PTFE, PVDF, FEP, Fluoroelastomers) & Application (Automotive, Electrical & Electronics, Chemical Processing, Industrial) – Global Trends & Forecast to 2018 [Online], (2013).

[4]. S. R. Parab, D S Chodankar, R. M. Shirgaunkar, M Fernandes, A. B. Parab, S. S. Aldonkar, P. P. Savoikar, “Geotubes for Beach Erosion Control in Goa”, Earth Sciences and Engineering, Vol. 4, pp. 1013-1016, (2011).

[5]. Linh, P. K., Ánh, C. T. N., Trung, L. H. & Nguyên, N. T. N. “Nghiên cứu bố trí không gian đê chắn sóng chống xói lở, bảo vệ bờ biển Phú Hải, Phú Vang, Thừa Thiên – Huế”. Tạp chí Tài nguyên nước số 01 tháng 02/2020, trang 58-66, (2020).

[6]. Doãn Tiến Hà, “Nghiên cứu diễn biến bãi do tác động của công trình giảm sóng, tạo bồi cho khu vực Hải Hậu-Nam Định”, Luận án Tiến sĩ chuyên ngành Hải dương học, Hà Nội, (2015).

[7]. Bộ Nông nghiệp và Phát triển nông thôn, Tiêu chuẩn kỹ thuật thiết kế đê biển, (2012).

[8]. Nguyễn Nhị Trự và đồng nghiệp, “Weather resistance of organic coatings exposed in the rural and marine tropical condition”, Journal of Science and Technology, (2015).

Published

22-04-2024

How to Cite

Tran, P. C., Nguyễn Đình Chinh, Nguyễn Văn Dũng, Nguyễn Đại Thắng, Bùi Thành Dương, Đinh Văn Duy, and Phạm Trung. “Improving the Durability of Polyester Geotextiles With fluoropolymer/Bitum Organic Coatings in Application of Coast Protecting Construction”. Journal of Military Science and Technology, no. 94, Apr. 2024, pp. 78-85, doi:10.54939/1859-1043.j.mst.94.2024.78-85.

Issue

Section

Research Articles

Categories