3D measurement of surface profile using Holography technique and Fourier transform method
120 viewsDOI:
https://doi.org/10.54939/1859-1043.j.mst.98.2024.132-138Keywords:
3D Measurement; Holography; Fourier transform.Abstract
Holography has an important role in the field of 3D surface measurement due to its ability to simultaneously provide intensity and phase information of the measured surface with a single image. In this article, a computational and experimental method for 3D surface reconstruction of rough samples using Holography technique is proposed. Compared with white light interferometry, the proposed method has high stability due to no micro-displacement, fast measurement speed, and surface information extracted by a single frame and axial resolution reaching nanometer level. Fourier transform combined with noise filtering techniques is used to improve the accuracy of 3D surface measurement. The rough surface Ra = 0.2943 µm is successfully constructed by the proposed method with a deviation of ± 8 nm with a coverage factor of 3 compared with the measurement on white light interferometry. This study can be applied to high-precision 3D surface measurement, optical components, and micro-electromechanical structures.
References
[1]. B. Dong, Y. Ma, Z. Ren, and C. Lee, “Recent progress in nanoplasmonics-based integrated optical micro/nano-systems” J. Phys. Appl. Phys, Vol. 53, No. 21, pp. 213001, (2020). DOI: https://doi.org/10.1088/1361-6463/ab77db
[2]. T. Namazu, “Mechanical Property Measurement of Micro/Nanoscale Materials for MEMS: A Review” IEEJ Transactions on Electrical and Electronic Engineering, Vol. 18, No. 3, pp. 308–324, (2023). DOI: https://doi.org/10.1002/tee.23747
[3]. Y. Li and M. Hong, “Parallel Laser Micro/Nano-Processing for Functional Device Fabrication,” Laser & Photonics Reviews, Vol. 14, No. 3, pp. 1900062, (2020). DOI: https://doi.org/10.1002/lpor.201900062
[4]. A. G. Marrugo, F. Gao, S. Zhang, “State-of-the-art active optical techniques for three dimensional surface metrology: a review”. Journal of the Optical Society of America A. Vol. 37, No. 9, (2020). DOI: https://doi.org/10.1364/JOSAA.398644
[5]. Maged Aboali, Nurulfajar Abd Manap, Abd Majid Darsono, and Zulkalnain Mohd Yusof, “Review on Three Dimensional (3-D) Acquisition and Range Imaging Techniques”, International Journal of Applied Engineering Research, Vol. 12, Number 10, pp. 2409-2421, (2017).
[6]. Akhtar et al., “Three-dimensional atomic force microscopy for ultra-high-aspect-ratio imaging,” Applied Surface Science, Vol. 469, pp. 582–592, (2019). DOI: https://doi.org/10.1016/j.apsusc.2018.11.030
[7]. B. Voigtländer, “Atomic Force Microscopy”, NanoScience and Technology. Cham: Springer International Publishing, (2019). DOI: https://doi.org/10.1007/978-3-030-13654-3
[8]. D. Lange, H. Jennings, and S. Shah, “Analysis of Surface Roughness Using Confocal Microscopy” Journal of Materials Science, Vol. 28, pp. 3879–3884, (1993). DOI: https://doi.org/10.1007/BF00353195
[9]. X. Teng, F. Li, and C. Lu, “Visualization of materials using the confocal laser scanning microscopy technique,” Chem. Soc. Rev., Vol. 49, No. 8, pp. 2408–2425, (2020). DOI: https://doi.org/10.1039/C8CS00061A
[10]. D. Elliott, “Confocal Microscopy: Principles and Modern Practices,” Current Protocols in Cytometry, Vol. 92, No. 1, pp. 68, (2020). DOI: https://doi.org/10.1002/cpcy.68
[11]. Y. Huang, J. Gao, L. Zhang, H. Deng, and X. Chen, “Fast template matching method in white-light scanning interferometry for 3D micro-profile measurement,” Appl. Opt., AO, Vol. 59, No. 4, pp. 1082–1091, (2020). DOI: https://doi.org/10.1364/AO.379996
[12]. Q. Vo, F. Fang, X. Zhang, and H. Gao, “Surface recovery algorithm in white light interferometry based on combined white light phase shifting and fast Fourier transform algorithms,” Appl. Opt., AO, Vol. 56, No. 29, pp. 8174–8185, (2017). DOI: https://doi.org/10.1364/AO.56.008174
[13]. Gabor, D, “A new microscopic principle”. Nature, Vol 161, pp. 777–778, (1948). DOI: https://doi.org/10.1038/161777a0
[14]. Viktor Petrov, Anastsiya Pogoda, Vladimir Sementin, Alexander Sevryugin, Egor Shalymov, Dmitrii Venediktov and Vladimir Venediktov, “Review Advances in Digital Holographic Interferometry”, Imaging, Vol. 8, pp. 196, (2022). DOI: https://doi.org/10.3390/jimaging8070196
[15]. P. Hariharan, “Basics of Holography”, Cambridge University Press, Cambridge, pp.6, (2002). DOI: https://doi.org/10.1017/CBO9780511755569
[16]. Sina Baya, Mustapha Bahich, and Lahsen Boulmane, "Comparative study of phase retrieval algorithms for surface shape measurement by optical profilometry," Opt. Continuum, Vol. 3, pp. 859-870, (2024). DOI: https://doi.org/10.1364/OPTCON.514047
[17]. Y. Liu, Z. Wang, J. Li, J. Gao, and J. Huang, “Phase based method for location of the centers of side bands in spatial frequency domain in off-axis digital holographic microcopy,” Optics and Lasers in Engineering, Vol. 86, pp. 115–124, (2016). DOI: https://doi.org/10.1016/j.optlaseng.2016.05.018
[18]. Y. Liu, Z. Wang, and J. Huang, “Recent Progress on Aberration Compensation and Coherent Noise Suppression in Digital Holography,” Applied Sciences, Vol. 8, No. 3, (2018). DOI: https://doi.org/10.3390/app8030444
[19]. U. Schnars and W. Juptner, “Digital Holography”, Springer, p. 47-48, (2005).
[20]. E. Cuche, F. Bevilacqua, and C. Depeursinge, “Digital holography for quantitative phase-contrast imaging,” Opt. Lett. Vol. 24, p. 291–293, (1999). DOI: https://doi.org/10.1364/OL.24.000291
[21]. Su and W. Chen, “Reliability-guided phase unwrapping algorithm: a review,” Optics and Lasers in Engineering, Vol. 42, No. 3, pp. 245–261, (2004). DOI: https://doi.org/10.1016/j.optlaseng.2003.11.002
[22]. E. Cuche, P. Marquet, and C. Depeursinge, “Simultaneous amplitude-contrast and quantitative phase-contrast microscopy by numerical reconstruction of Fresnel off-axis holograms”, App.Opt. 38, (1999). DOI: https://doi.org/10.1364/AO.38.006994
[23]. Myung K Kim, “Principles and techniques of digital holographic microscopy”, Journal of Photonics for Energy 1(1):8005.
[24]. T. Kreis, “Holographic Interferometry: Principles and Methods”, Springer, p.64, (1996).
[25]. Yuanbo Deng & Daping Chu, “Coherence properties of different light sources and their effect on the image sharpness and speckle of holographic displays”, Scientific Reports, Vol. 7, 5893, (2017). DOI: https://doi.org/10.1038/s41598-017-06215-x
[26]. https://www.thorlabs.com/newgrouppage9.cfm?objectgroup_id=10776.
[27]. Hecht, E. “Optics, 5th ed”, Pearson Education India: London, UK; pp. 398-456, (2002).
[28]. https://www.thorlabs.com/newgrouppage9.cfm?objectgroup_id=14350