A NEW ALGORITHM FOR DETECTON OF LEVEL I MARKER IN SIGNAL PROCESSING OF RADAR 4 BEAM 3D
150 viewsDOI:
https://doi.org/10.54939/1859-1043.j.mst.75.2021.43-49Keywords:
CUDA; 3D.Abstract
This paper presents level I marker detection algorithm on 4 beam 3D Radar using CUDA multi-core parallel calculation tool. To solve the above problem, we have to decompose the grade I marker algorithm into many smaller problems that can be executed in parallel on NVIDIA GPUs to reduce processing time. The goal is to ensure aerial target detection with minimal sync delay and minimum cost. We show how to organize a level I signal processing program and build a specific parallel processing algorithm based on CUDA technology. As a result, a grade-I marker detection program was built with the same performance and performance as the 354ПC01 block of 3D 4 beam radar station.
References
[1]. Mark A.Richards “Fundamentals of Radar Signal Processing” Mc.Graw-Hill ELECTRONIC ENGINEERING.
[2]. Christopher Cooper, “GPU Computing with CUDA”. Boston University, 2011
[3]. Jimmy Pettersson Ian Wainwright., “Radar Signal Processing with Graphics Processors (GPUs)”, Examensarbete 30 hp Februari 2010.
[4]. Christain Jacobus Venter., “Software-defined Pulse-doppler radar signal processing on graphic processors”, University of Pretoria May 2014.
[5]. Vũ Đăng Chiến “Nghiên cứu xây dựng bộ phát hiện kiểu tích luỹ tương can tín hiệu Rađa”, Học viện Kỹ thuật quân sự 2003.
[6]. Đinh Kim Thương “Đài ra đa 3 tọa độ 36D6M1”, CKT Quân chủng PK-KQ 2011.
