Application of MOORA and MEREC methods to select the best schema of scissors mechanisms
421 viewsDOI:
https://doi.org/10.54939/1859-1043.j.mst.FEE.2022.177-184Keywords:
Lift table; Optimal design; MCDM; MOORA method; MEREC method.Abstract
A lift table is a very common device in industry. To lift goods or people, this device employs a scissors mechanism. There are numerous designs for the scissors mechanism. Each schema will produce a different set of output responses when given the same set of input parameters. As a result, determining the best scheme is critical when designing an optimal lift table. The results of a study that used the multi-criteria decision making (MCDM) technique to determine the best scheme for designing a lift table to meet two criteria at the same time: minimum lifting time and maximum lifting force are presented in this paper. To achieve this, nine different scissor lifting mechanism diagrams were analyzed using the Multi-Objective Optimization Ratio Analysis (MOORA) method to solve the MCDM problem and the Method based on the Removal Effects of Criteria (MEREC) to calculate the weights of criteria. Finally, the most effective lift table design scheme has been suggested.
References
[1]. Doçi, I., et al., "Scissor lift dynamic analysis and motion regulation for the case of lifting with maximum load". Trans Motauto World. 6(2): p. 38-42, (2021).
[2]. Hongyu, T. and Z. Ziyi, "Design and simulation based on Pro/E for a hydraulic lift platform in scissors type". Procedia Engineering. 16: p. 772-781, (2011). DOI: https://doi.org/10.1016/j.proeng.2011.08.1153
[3]. Arunkumar, G., R. Kartheeshwaran, and J. Siva. "Investigation on design, analysis and topological optimization of hydraulic scissor lift". in Journal of Physics: Conference Series. IOP Publishing, (2021). DOI: https://doi.org/10.1088/1742-6596/2054/1/012081
[4]. Islam, M.T., et al. "Dynamic analysis of scissor lift mechanism through bond graph modeling". in 2014 IEEE/ASME International Conference on Advanced Intelligent Mechatronics. DOI: https://doi.org/10.1109/AIM.2014.6878277
[5]. Liu, T. and J. Sun. "Simulative calculation and optimal design of scissor lifting mechanism". in 2009 Chinese Control and Decision Conference.
[6]. Dong, R.G., et al., "An investigation on the dynamic stability of scissor lift". Open Journal of Safety Science and Technology. 2(01): p. 8, (2012). DOI: https://doi.org/10.4236/ojsst.2012.21002
[7]. Stawinski, L., et al., "A new approach for control the velocity of the hydrostatic system for scissor lift with fixed displacement pump". Archives of Civil and Mechanical Engineering. 19(4): p. 1104-1115, (2019). DOI: https://doi.org/10.1016/j.acme.2019.06.001
[8]. Zhang, W., et al., "A study on the static stability of scissor lift". The Open Mechanical Engineering Journal. 9(1), (2015). DOI: https://doi.org/10.2174/1874155X0150901954
[9]. ULINE, "Electric Lift Table". https://www.uline.com/Product/Detail/H-3935/Lift-Tables/Electric-Lift-Table-2000-lb-48-x-36, accessed 20/5/2022.
[10]. Alinezhad, A., "New methods and applications in multiple attribute decision making (MADM)". 2019: Springer. DOI: https://doi.org/10.1007/978-3-030-15009-9
[11]. Keshavarz-Ghorabaee, M., "Assessment of distribution center locations using a multi-expert subjective–objective decision-making approach". Scientific Reports 11, 19461 (2021). https://doi.org/10.1038/s41598-021-98698-y, 2021.v DOI: https://doi.org/10.1038/s41598-021-98698-y
