Research and analyze material composition electrodes of Li-ion battery with high discharge current
170 viewsDOI:
https://doi.org/10.54939/1859-1043.j.mst.93.2024.63-70Keywords:
Li-ion battery; Electrodes; Active Material; High discharge current.Abstract
The monolithic cylindrical Li-ion battery, measuring 360 × 50mm (length × diameter), possesses the following electrochemical specifications: voltage of 3.7 V and a capacity of 40 Ah. It was disassembled for the purpose of researching electrode materials. Advanced materials analysis techniques, such as scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), and inductively coupled plasma mass spectrometry (ICP MS), were employed to ascertain the composition, morphology, and structure of the electrode materials. The analytical findings indicate that the positive electrode comprises an active material primarily composed of Lithium Cobalt Oxide, along with additives coated on an aluminum (Al) foil with a thickness of 25 micrometers. The primary constituent of the negative active material is graphite, coated on copper (Cu) foil with a thickness of 20 micrometers.
References
[1]. Патрушев В.В., Кудрявцев Н.А., Агеев Д.М., “Современное состояние электрических источников энергии морского подводного оружия,” Подводное морское оружие, vol. 2, no. 50, pp. 41-54, (2020).
[2]. Naoki Nitta, Feixiang Wu, Jung Tae Lee, Gleb Yushin, “Li-ion battery materials: present and future,” Materials Today, vol. 18, no. 5, pp. 252-264, (2015). DOI: https://doi.org/10.1016/j.mattod.2014.10.040
[3]. R. P. Diouf Boucar, “Potential of lithium-ion batteries in renewable energy,” Renewable Energy, vol. 76, pp. 375-380, (2015). DOI: https://doi.org/10.1016/j.renene.2014.11.058
[4]. L. Bodenes, “Lithium secondary batteries working at very high temperature: Capacity fade and understanding of aging mechanisms,” Journal of Power Sources, vol. 236, pp. 265-275, (2013). DOI: https://doi.org/10.1016/j.jpowsour.2013.02.067
[5]. Nguyen Van Nghia, Nguyen Van Ky, “Original article characteristic investigations of a commercial cylindrical-type lithium-ion battery,” VNU Journal of Science, vol. 39, pp. 29-37, (2020).
[6]. M. Schmitt, P. Scharfer, W. Schabel, “Slot-die processing of lithium-ion battery electrodes—Coating window characterization,” Chemical Engineering and Processing: Process Intensification, vol. 68, pp. 32-37, (2013). DOI: https://doi.org/10.1016/j.cep.2012.10.011
[7]. Schmitt M., Scharfer P., Schabel W., “Slot die coating of lithium-ion battery electrodes: investigations on edge effect issues for stripe and pattern coatings,” Journal of Coatings Technology and Research, vol. 11, p. 57–63, (2014). DOI: https://doi.org/10.1007/s11998-013-9498-y
[8]. J. Yamaki, “Secondary batteries – Lithium rechargeable systems – Lithium-ion | Overview,” Encyclopedia of Electrochemical Power Sources, pp. 183-191, (2009). DOI: https://doi.org/10.1016/B978-044452745-5.00186-6
[9]. Carl D. Reynolds, Peter R. Slater, Sam D. Hare, Mark J.H. Simmons, Emma Kendrick, “A review of metrology in lithium-ion electrode coating processes,” Materials & Design, vol. 209, p. 109971, (2021). DOI: https://doi.org/10.1016/j.matdes.2021.109971
[10]. M. C. Dongxu Ouyang, “Investigation of a commercial lithium-ion battery under overcharge/over-discharge failure conditions,” RSC Advances, vol. 8, no. 58, pp. 33414-33424, (2018). DOI: https://doi.org/10.1039/C8RA05564E
[11]. “Модуль литий-ионной аккумуляторной батареи”. RU Patent RU2732070C1, (2020).
[12]. “Аккумуляторная батарея”. RU Patent RU2667905C1, (2017).
