Synthesis and heating efficiency of Fe3O4-Ag hybrid nanoparticles

232 views

Authors

  • Le Thi Hong Phong Institute of Materials Science, Vietnam Academy of Science and Technology
  • Pham Hong Nam Institute of Materials Science, Vietnam Academy of Science and Technology
  • Ta Ngoc Bach Institute of Materials Science, Vietnam Academy of Science and Technology
  • Pham Thanh Phong Institute of Applied Science and Technology, Van Lang University
  • Do Hung Manh (Corresponding Author) Institute of Materials Science, Vietnam Academy of Science and Technology

DOI:

https://doi.org/10.54939/1859-1043.j.mst.77.2022.111-119

Keywords:

Optical-magnetic material; Heating; Magnetite nanoparticle; Fe3O4-Ag.

Abstract

 The magnetic-plasmonic nanostructures have received much attention in recent years due to high heating efficiency from the local surface plasmonic resonance (LSPR) properties of the plasmonic component and the magnetic inductive heating of the magnetic nanoparticles. In this study, we synthesized the Fe3O4-Ag hybrid nanoparticles by seed-growth method and investigated the influence of Ag fraction on heating ability when combining AC magnetic field exposure and laser irradiation. All samples with the ratios of Fe3O4:Ag 1:0.54; 1:1.01, and 1:1.62, respectively, exhibited that the heating efficiency under the photo-magnetic combined irradiation effect is higher than that compared with that without. Interestingly, the lowest Ag fraction sample showed the SAR value reached 230,5 W/g under the simultaneous irradiation of both magnetic field (200 Oe, 340 kHz) and laser with low power (0,14 W/cm2) and was nearly 3,5 times higher than the SAR of the pure Fe3O4.

References

[1]. H. Veisi, R. Ghorbani-Vaghei, S. Hemmati, M. Haji Aliani, and T. Ozturk, “Green and effective route for the synthesis of monodispersed palladium nanoparticles using herbal tea extract (Stachys lavandulifolia) as reductant, stabilizer and capping agent, and their application as homogeneous and reusable catalyst in Suzuki couplin,” Appl. Organomet. Chem., vol. 29, no. 1 (2015), pp. 26–32.

[2]. C. Ma, J. C. White, J. Zhao, Q. Zhao, and B. Xing, “Uptake of Engineered Nanoparticles by Food Crops: Characterization, Mechanisms, and Implications,” Annu. Rev. Food Sci. Technol., vol. 9 (2018), pp. 129–153.

[3]. L. Papa et al., “Supports matter: Unraveling the role of charge transfer in the plasmonic catalytic activity of silver nanoparticles,” J. Mater. Chem. A, vol. 5, no. 23 (2017), pp. 11720–11729.

[4]. A. Polyak and T. L. Ross, “Nanoparticles for SPECT and PET Imaging: Towards Personalized Medicine and Theranostics,” Curr. Med. Chem., vol. 25, no. 34 (2018), pp. 4328–4353.

[5]. Q. A. Pankhurst, J. Connolly, S. K. Jones, and J. Dobson, “Applications of magnetic nanoparticles in biomedicine,” J. Phys. D. Appl. Phys., vol. 36 (2003), pp. R167–R181.

[6]. V.T.K. Oanh et al., “A Novel Route for Preparing Highly Stable Fe3O4 Fluid with Poly(Acrylic Acid) as Phase Transfer Ligand,” J. Electron. Mater., vol. 45, no. 8 (2016), pp. 4010–4017.

[7]. P. T. Phong et al., “Iron Oxide Nanoparticles: Tunable Size Synthesis and Analysis in Terms of the Core–Shell Structure and Mixed Coercive Model,” J. Electron. Mater., vol. 46, no. 4 (2017), pp. 2533–2539.

[8]. T.K.O. Vuong et al., “Synthesis of high-magnetization and monodisperse Fe3O4 nanoparticles via thermal decomposition,” Mater. Chem. Phys., vol. 163 (2015), pp. 537–544.

[9]. N.T.K. Thanh and L.A.W. Green, “Functionalisation of nanoparticles for biomedical applications,” Nano Today, vol. 5, no. 3 (2010), pp. 213–230.

[10]. P. Kucheryavy et al., “Superparamagnetic iron oxide nanoparticles with variable size and an iron oxidation state as prospective imaging agents,” Langmuir, vol. 29, no. 2 (2013), pp. 710–716.

[11]. K.S. Siddiqi, A. Husen, and R. A. K. Rao, “A review on biosynthesis of silver nanoparticles and their biocidal properties,” J. Nanobiotechnology, vol. 16, no. 1, (2018).

[12]. H. Veisi, M. Kavian, M. Hekmati, and S. Hemmati, “Biosynthesis of the silver nanoparticles on the graphene oxide’s surface using Pistacia atlantica leaves extract and its antibacterial activity against some human pathogens,” Polyhedron, vol. 161 (2019), pp. 338–345.

[13]. C. Li, Z. Guan, C. Ma, N. Fang, H. Liu, and M. Li, “Bi-phase dispersible Fe3O4/Ag core–shell nanoparticles: Synthesis, characterization and properties,” Inorg. Chem. Commun., vol. 84 (2017), pp. 246–250.

[14]. H. Veisi, L. Mohammadi, S. Hemmati, T. Tamoradi, and P. Mohammadi, “In Situ Immobilized Silver Nanoparticles on Rubia tinctorum Extract-Coated Ultrasmall Iron Oxide Nanoparticles: An Efficient Nanocatalyst with Magnetic Recyclability for Synthesis of Propargylamines by A3 Coupling Reaction,” ACS Omega, vol. 4, no. 9 (2019), pp. 13991–14003.

[15]. M. Shahriary, H. Veisi, M. Hekmati, and S. Hemmati, “In situ green synthesis of Ag nanoparticles on herbal tea extract (Stachys lavandulifolia)-modified magnetic iron oxide nanoparticles as antibacterial agent and their 4-nitrophenol catalytic reduction activity,” Mater. Sci. Eng. C, vol. 90 (2018), pp. 57–66.

[16]. R. Das et al., “Boosted Hyperthermia Therapy by Combined AC Magnetic and Photothermal Exposures in Ag/Fe3O4 Nanoflowers,” ACS Appl. Mater. Interfaces, vol. 8, no. 38 (2016), pp. 25162–25169.

[17]. Q. Ding et al., “Shape-controlled fabrication of magnetite silver hybrid nanoparticles with high performance magnetic hyperthermia,” Biomaterials, vol. 124 (2017), pp. 35–46.

[18]. N.T.N. Linh et al., “Combination of photothermia and magnetic hyperthermia properties of Fe3O4@Ag hybrid nanoparticles fabricated by seeded-growth solvothermal reaction,” Vietnam J. Chem., vol. 59, no. 4 (2021), pp. 431–439.

[19]. J.C. Pieretti, W.R. Rolim, F.F. Ferreira, C.B. Lombello, M.H.M. Nascimento, and A.B. Seabra, “Synthesis, Characterization, and Cytotoxicity of Fe3O4@Ag Hybrid Nanoparticles: Promising Applications in Cancer Treatment,” J. Clust. Sci., vol. 31, no. 2 (2020), pp. 535–547.

[20]. R. Di Corato et al., “Magnetic nanobeads decorated with silver nanoparticles as cytotoxic agents and photothermal probes,” Small, vol. 8, no. 17 (2012), pp. 2731–2742.

[21]. C.C. Qi and J. Bin Zheng, “Synthesis of Fe3O4-Ag nanocomposites and their application to enzymeless hydrogen peroxide detection,” Chem. Pap., vol. 70, no. 4 (2016), pp. 404–411.

[22]. W. Fang et al., “Facile synthesis of tunable plasmonic silver core/magnetic Fe3O4 shell nanoparticles for rapid capture and effective photothermal ablation of bacterial pathogens,” New J. Chem., vol. 41, no. 18 (2017), pp. 10155–10164.

[23]. L.M. Tung et al., “Synthesis, characterizations of superparamagnetic Fe3O4-Ag hybrid nanoparticles and their application for highly effective bacteria inactivation,” J. Nanosci. Nanotechnol., vol. 16, no. 6 (2016), pp. 5902–5912.

[24]. R. Ramesh, M. Geerthana, S. Prabhu, and S. Sohila, “Synthesis and Characterization of the Superparamagnetic Fe3O4/Ag Nanocomposites,” J. Clust. Sci., vol. 28, no. 3 (2017), pp. 963–969.

[25]. T.T.N. Nha et al., “Sensitive MnFe2O4-Ag hybrid nanoparticles with photothermal and magnetothermal properties for hyperthermia applications,” RSC Adv., vol. 11, no. 48 (2021), pp. 30054–30068.

[26]. A.C. Batista de Jesus et al., “Influence of Ag on the Magnetic Anisotropy of Fe3O4 Nanocomposites,” J. Supercond. Nov. Magn., vol. 32, no. 8 (2019), pp. 2471–2477.

[27]. J. Chen et al., “Au-silica nanowire nanohybrid as a hyperthermia agent for photothermal therapy in the near-infrared region,” Langmuir, vol. 30, no. 31 (2014), pp. 9514–9523.

Published

25-02-2022

How to Cite

Lê, P., Nam, Bách, Phong, and Mạnh. “Synthesis and Heating Efficiency of Fe3O4-Ag Hybrid Nanoparticles”. Journal of Military Science and Technology, no. 77, Feb. 2022, pp. 111-9, doi:10.54939/1859-1043.j.mst.77.2022.111-119.

Issue

Section

Research Articles

Most read articles by the same author(s)

1 2 > >>