Research on selection of porous ceramic for loading metal -organic- frameworks applied in gas treatment
172 viewsDOI:
https://doi.org/10.54939/1859-1043.j.mst.FEE.2022.221-229Keywords:
Porous ceramic material; Alumina ceramic; Gas treatment; CuBTC; FeBTC.Abstract
In this paper, some properties of porous insulating foam materials, available alumina particles and alumina ceramic materials were investigate. The survey results show that the insulating foam materials and alumina particles have density from 0.9 g/cm3 to 1.26 g/cm3, porosity from 50-53 %, water absorption from 39-45 % while aluminum oxide ceramic materials are made by sintering method with density from 0.64-0.73g/cm3, porosity from 69-74% and water absorption up to 108%. The results of carrying the metal-organic- framework by impregnating showed that the alumina and heat-resistant ceramic particles carried a maximum of 6% CuBTC and 8% FeBTC by mass, while the alumina ceramic material can bring up to 9% CuBTC and more than 10% FeBTC. The test results of the ability to handle NOx gas and acetone vapor show that the aluminum oxide ceramic material can adsorb up to 19 % NOx gas and 23 % acetone vapor by mass.
References
[1]. Organization, W.H., "Ambient air pollution: A global assessment of exposure and burden of disease". (2016).
[2]. Manisalidis, I., et al., "Environmental and health impacts of air pollution: a review". Frontiers in public health, p. 14, (2020). DOI: https://doi.org/10.3389/fpubh.2020.00014
[3]. Amann, M., et al., "Reducing global air pollution: the scope for further policy interventions". Philosophical Transactions of the Royal Society A. 378(2183): p. 20190331, (2020). DOI: https://doi.org/10.1098/rsta.2019.0331
[4]. Kitagawa, S., "Porous materials and the age of gas", in Angewandte Chemie International Edition. Wiley Online Library. p. 10686-10687, (2015). DOI: https://doi.org/10.1002/anie.201503835
[5]. Li, H., et al., "Porous metal-organic frameworks for gas storage and separation: Status and challenges". EnergyChem. 1(1): p. 100006, (2019). DOI: https://doi.org/10.1016/j.enchem.2019.100006
[6]. Farha, O.K., et al., "Metal–organic framework materials with ultrahigh surface areas: is the sky the limit?". Journal of the American Chemical Society. 134(36): p. 15016-15021, (2012). DOI: https://doi.org/10.1021/ja3055639
[7]. Ma, M., et al., "Recent progress of MOF-derived porous carbon materials for microwave absorption". RSC advances. 11(27): p. 16572-16591, (2021). DOI: https://doi.org/10.1039/D1RA01880A
[8]. Okoro, H.K., et al., "Adsorptive removal of naphthalene and anthracene from aqueous solution with zinc and copper-terephthalate metal-organic frameworks". Bulletin of the Chemical Society of Ethiopia. 33(2): p. 229-241, (2019). DOI: https://doi.org/10.4314/bcse.v33i2.4
[9]. Li, P., et al., "A metal–organic framework as a highly efficient and reusable catalyst for the solvent-free 1, 3-dipolar cycloaddition of organic azides to alkynes". Inorganic Chemistry Frontiers. 2(1): p. 42-46, , (2015). DOI: https://doi.org/10.1039/C4QI00148F
[10]. Azmi, L.H.M., et al., "Fabrication of MIL-101-polydimethylsiloxane composites for environmental toluene abatement from humid air". Chemical Engineering Journal. 429: p. 132304, (2022). DOI: https://doi.org/10.1016/j.cej.2021.132304
[11]. Wang, Z., et al., "Shaping of Metal–Organic Frameworks: A Review". Energy
[12]. Fuels. 36(6): p. 2927-2944, (2022). DOI: https://doi.org/10.1021/acs.energyfuels.1c03426
[13]. Valizadeh, B., T.N. Nguyen, and K.C. Stylianou, "Shape engineering of metal–organic frameworks". Polyhedron. 145: p. 1-15, (2018). DOI: https://doi.org/10.1016/j.poly.2018.01.004
[14]. Trần Văn Chinh, N.D.A., Đoàn Thị Ngãi, Nguyễn Thị Hoài Phương, Lê Thanh Bắc, Phan Thanh Xuân, Nguyễn Công Thắng, "Nghiên cứu đặc trưng của vật liệu khung cơ kim trong hấp phụ khí". Tạ chí Hóa học. 53(3e12): p. 173-177, (2015).
[15]. Le Thanh Bac, N.T.H.P., La Duc Duong, Nguyen Thi Phuong, "Green synthesis of MIL-100(Fe) metal-organic frameworks as a carrier for chloroquine delivery". Journal of Military Science and Technology. 76: p. 61-67, (2021). DOI: https://doi.org/10.54939/1859-1043.j.mst.76.2021.61-67
[16]. Ghorai, S. and Pant, "Equilibrium, kinetics and breakthrough studies for adsorption of fluoride on activated alumina". Separation purification technology. 42(3): p. 265-271, (2005). DOI: https://doi.org/10.1016/j.seppur.2004.09.001
[17]. Singh, T.S. and Pant, "Equilibrium, kinetics and thermodynamic studies for adsorption of As (III) on activated alumina". Separation purification technology. 36(2): p. 139-147, (2004). DOI: https://doi.org/10.1016/S1383-5866(03)00209-0
[18]. Lin, T.-F. and J.-K. Wu, "Adsorption of arsenite and arsenate within activated alumina grains: equilibrium and kinetics". Water research. 35(8): p. 2049-2057, (2001). DOI: https://doi.org/10.1016/S0043-1354(00)00467-X
