Preparation of the porous spherical propellant by using the additives of alkali-metal salt

24 views

Authors

  • Doan Minh Khai (Corresponding Author) Le Quy Don Technical University
  • Phan Duc Nhan Le Quy Don Technical University
  • Nguyen Duy Tuan Le Quy Don Technical University
  • Nguyen Minh Tuan Le Quy Don Technical University

DOI:

https://doi.org/10.54939/1859-1043.j.mst.IPE.2024.104-109

Keywords:

Spherical propellant; Additive; Alkali-metal salt; Porous spherical propellant.

Abstract

This article presents the research results on using some alkali-metal salts as additives in the technological process of making porous spherical propellants and the effects of some of these additives on the porosity and some characteristics of the propellant. The porous spherical propellants are prepared using the emulsion method with additive concentrations of Na2SO4, K2SO4, and KNO3 from 0% to 3%. The important characteristics of the sample were determined, such as heat of combustion (Qv), bulk density (ω), temperature of ignition (Tig), and chemical stability. The porosity is calculated and converted through bulk density and theoretical density. The results show that the sample with the Na2SO4 salt has the best porosity (51÷53%) at concentrations over 2%. The important characteristics of the porous propellant do not change significantly compared to the no-additive spherical propellant.

References

[1]. Colgate S. A., Alamos L., Roos E., "Fast burning propellant". U.S. Patent No. 4,681,643 (1987).

[2]. Li Y., Yang W., Ying S., "Burning characteristics of consolidated gun propellants", Propellants, Explosives, Pyrotechnics, 40, 33-38, (2015).

[3]. Accurate Arms Company I. - "Accurate smokeless powder". Wolfe Publishing Company, 6471 Airpark Drive, Prescott, AZ 86301, (2000).

[4]. Михайлов Ю., "Физикохимия флегматизированных порохов", Черноголовка. ИПХФ РАН, (2001).

[5]. Botelho F. D., Galante E. B. F., Mendes Á. J. B., "Characteristics and manufacture of spherical smokeless powders", Journal of aerospace technology and management, 7, 398-403, (2015).

[6]. Zeigler E. H., "Process for preparing nitrocellulose for use in small arms". U.S. Patent No. 4,031,172 (1977).

[7]. Fung K. F., "Process for preparing free flowing spheroidal nitrocellulose particles". (1997).

[8]. Setiani W. S., Utami M., Yunanda W. W., Muzizah M., Kalasmoro K., Wardani R. M., Ningsih T. G., Suharnoko S., Ruyat Y., Hafizah M. A. E., "The Granulation Methods of Double Base Propellant for Small Caliber Ammunition: A Review", International Journal of Social Science Research and Review, 6, 247-251, (2023).

[9]. Фиошина М. А., Русин Д. Л. - "Основы химии и технологии порохов и твердых ракетных топлив". РХТУ,(2004).

[10]. Гиндич В., "Технология пироксилиновых порохов", В двух томах. Казань, (1995).

[11]. Ball A. - "Explosive Series, Solid Propellant Part One". AMCP,(1964).

Downloads

Published

14-10-2024

How to Cite

Doan Minh Khai, Phan Duc Nhan, Nguyen Duy Tuan, and Nguyen Minh Tuan. “Preparation of the Porous Spherical Propellant by Using the Additives of Alkali-Metal Salt”. Journal of Military Science and Technology, no. IPE, Oct. 2024, pp. 104-9, doi:10.54939/1859-1043.j.mst.IPE.2024.104-109.

Issue

Section

Research Articles

Categories