SYNTHESIS OF MIXED-METAL MIL(Ti-Fe) FROM VIETNAM ILMENITE ORE AND ITS APPLICATION FOR DEGRADATION OF DYE
180 viewsDOI:
https://doi.org/10.54939/1859-1043.j.mst.75A.2021.17-28Keywords:
MIL-125(Ti); Photocatalytic degradation; Rhodamine B; Ilmenite ore.Abstract
In this work, the mixed-metal metal-organic frameworks MIL(Ti-Fe) were synthesized by the hydrothermal method. MIL(Ti-Fe) hybrid material was fabricated from ilmenite ore and 1,3,5-benzene tricarboxylic acid at a temperature of 130 oC for 24 hours. The prepared material was characterized by using scanning electron microscopy (SEM), X-ray diffraction (XRD), infrared spectroscopy (IR), and Brunauer-Emmett-Teller (BET) surface area. The obtained MIL(Ti-Fe) particles have a diameter of from 0.2-1.0 µm with a BET surface area of 85.482 m2 g-1. The influence of various vital parameters such as pH of the dye solution, initial dye concentration, adsorption time, and amount of the catalyst on the dye removal efficiency was investigated. The photocatalytic degradation rate of Rhodamine B was found to be 0.0074 min-1 at pH 7. The maximum removal of Rhodamine B was obtained at the catalyst dose of 1.0 g L-1. Under simulated sunlight irradiation, the resultant mixed-metals MOFs showed high photodegradation toward Rhodamine with degradation efficiency of approximately 99,97% after 6 hours. Furthermore, the resultant materials also showed remarkable absorption behavior toward Rhodamine B with the adsorption capacity of 70 mg g-1.
References
[1]. Zaharia Carmen and Suteu Daniela, "Textile Organic Dyes - Characteristics, Polluting Effects and Separation/Elimination Procedures from Industrial Effluents - A critical overview," in Organic pollutants ten years after the Stockholm convention - Environmental & analytical update, T. Puzyn, Ed., Rijeka, Intech, 2012, pp. 55-86.
[2]. A. Yaseen, "Comparison of experimental ponds for the treatment of dye wastewater under controlled and semi-natural conditions," Environmental Science and Pollution Research, vol. 24.
[3]. Siew-Teng Ong, Pei-Sin Keng, Weng-Nam Lee, Sie-Tiong Ha and Yung-Tse Hung, "Dye Waste Treatment," Water, vol. 3, pp. 157-176, 2011.
[4]. H. Li, L. Li, R. B. Lin, W. Zhou, Z. Zhang, S. Xiang, B. Chen, "Porous metal-organic frameworks for gas storage and separation: Status and challenges," EnergyChem, vol. 1, no. 1, p. 100006, 2019.
[5]. L. E. Kreno, K. Leong, O. K. Farha, M. Allendorf, R. P. Van Duyne, J. T. Hupp, "Metal-Organic Framework Materials as Chemical Sensors", Chemical Reviews, vol. 112, pp. 1105-1125, 2012.
[6]. R. Singh, Geetanjali, "Metal-organic frameworks for drug delivery," in Applications of Nanocomposite Materials in Drug Delivery, Woodhead Publishing Series in Biomaterials, 2018, pp. 605-617.
[7]. Y. Zhao, Z. Song, X. Li, Q. Sun, N. Cheng, S. Lawes, X. Sun, "Metal-organic frameworks for energy storage and conversion," Energy Storage Materials, vol. 2, pp. 35-62, 2016.
[8]. Chunping Xu, Ruiqi Fang, Rafael Luque, Liyu Chen, Yingwei Li, "Functional metal-organic frameworks for catalytic applications," Coordination Chemistry Reviews, vol. 388, pp. 268-292, 2019.
[9]. Sujit K. Ghosh, “Metal-Organic Frameworks for Environmental Applications”, Elsevier, 2019.
[10]. Caihong Zhang, Lunhong Ai and Jing Jiang, "Solvothermal synthesis of MIL–53(Fe) hybrid magnetic composites for photoelectrochemical water oxidation and organic pollutant photodegradation under visible light," Journal of Materials Chemistry A, vol. 3, no. 6, pp. 3074-3081, 2015.
[11]. S. Abednatanzi, P. G. Derakhshandeh, H. Depauw, F. X. Coudert, H. Vrielinck, P. V. D. Voort, K. Leus, "Mixed-metal metal–organic frameworks," Chemical Society Reviews, vol. 48, no. 9.
[12]. A. Dhakshinamoorthy, A. R. Malik, H. Garcia, A. M. Asiri, "Mixed-metal or mixed-linker metal-organic frameworks as heterogeneous catalysts," Catalysis Science & Technology, vol. 6, no. 14.
[13]. J. J Du, Y-P Yuan, J-X Sun, F-M Peng, X. Jiang, L-G Qiu, A-J Xie, Y-H Shen, J-F Zhu, "New photocatalysts based on MIL-53 metal-organic frameworks for the decolorization of methylene blue dye," Journal of Hazardous Materials, vol. 190, no. 1-3, pp. 945-951, 2011.
[14]. Lunhong Ai, Caihong Zhang, Lili Li, Jing Jiang, "Iron terephthalate metal-organic framework: Revealing the effective activation of hydrogen peroxide for the degradation of organic dye under visible light irradiation," Applied Catalysis B: Environmental, Vols. 148-149, pp. 191-200, 2014.
[15]. K. Guest, C. A. D. Caiuby, Á. Mayoral, M. Díaz-García, I. Díaz, M. Sanchez-Sanchez, "Sustainable Preparation of MIL-100(Fe) and Its Photocatalytic Behavior in the Degradation of Methyl Orange in Water," Crystal Growth and Design, vol. 17, no. 4, pp. 1806-1813, 2017.
[16]. Niyaz Mohammad Mahmoodi, Jafar Abdi, Mina Oveisi, Mokhtar Alinia Asli, Manouchehr Vossoughi, "Metal-organic framework (MIL-100 (Fe)): Synthesis, detailed photocatalytic dye degradation ability in colored textile wastewater and recycling," Materials Research Bulletin, vol. 100, pp. 357-366, 2018.
[17]. J. Zhu, P-Z Li, W. Quoc, Y. Zhao, R. Zou, "Titanium-based metal-organic frameworks for photocatalytic applications," Coordination Chemistry Reviews, vol. 359, pp. 80-101, 2018.
[18]. A. Wang, Y. Zhou, Z. Wang, M. Chen, L. Sun, X. Liu, "Titanium incorporated with UiO-66(Zr)-type Metal-Organic Framework (MOF) for photocatalytic application," RSC Advances, vol. 6, no. 5.
[19]. Xiyi Li, Yunhong Pi, Qibin Xia, Zhong Li, Jing Xiao, "TiO2 encapsulated in Salicylaldehyde-NH2-MIL-101(Cr) for enhanced visible-light-driven photodegradation of MB," Applied Catalysis B: Environmental, vol. 191, pp. 192-201, 2016.
[20]. Weiyi Ouyang, Alina Balu, Antonio Romero, "A novel mixed-metal organic framework and its possible applications," in ISGC2017, La Rochelle, France, 2017.
[21]. Bui Xuan Nam, Ho Si Giao, "Status of development orientations for mining titanium placers in Vietnam," Горные науки и технологии, vol. 1, pp. 40-50, 2016.
[22]. Mina Oveisi, Mokhtar Alina Asli, Niyaz Mohammad Mahmoodi, "MIL-Ti metal-organic frameworks (MOFs) nanomaterials as superior adsorbents: Synthesis and ultrasound-aided dye adsorption from multicomponent wastewater systems," Journal of Hazardous Materials, vol. 347, pp. 123-140, 2018.
[23]. Esra Yılmaz, Emine Sert, Ferhan SamiAtalay, "Synthesis, characterization of a metal-organic framework: MIL-53 (Fe) and adsorption mechanisms of methyl red onto MIL-53 (Fe)," Journal of the Taiwan Institute of Chemical Engineers, vol. 65, pp. 323-330, 2016.
[24]. Donald L. Pavia, Gary M. Lampman, George S. Kriz, James A. Vyvyan, “Introduction to Spectroscopy”, Cengage Learning, pp. 52-73, 2008.
[25]. Rowen Liang, Fenfen Jing, Lijuan Shen, Na Qin, Ling Wu, "MIL-53(Fe) as a highly efficient bifunctional photocatalyst for the simultaneous reduction of Cr(VI) and oxidation of dyes," Journal of Hazardous Materials, vol. 287, pp. 364-372, 2015.
[26]. Meenakshi Dan-Hardi, Christian Serre, Théo Frot, Laurence Rozes, Guillaume Maurin, Clément Sanchez, and Gérard Férey, "A New Photoactive Crystalline Highly Porous Titanium(IV) Dicarboxylate," Journal of the American Chemical Society, vol. 131, no. 31, pp. 10857-10859, 2009.
[27]. X. Zhao, D. Liu, H. Huang, W. Zhang, Q. Yang, C. Zhong, "The stability and defluoridation performance of MOFs in fluoride solutions," Microporous and Mesoporous Materials, vol. 185.
[28]. Y. Liu, "Is the Free Energy Change of Adsorption Correctly Calculated?" Journal of Chemical & Engineering Data, vol. 54, pp. 1981-1985, 2009.
[29]. H. Guo, F. Lin, J. Chen, F. Li, W. Weng, "Metal-organic framework MIL‐125(Ti) for efficient adsorptive removal of Rhodamine B from aqueous solution," Applied Organometallic Chemistry, vol. 29, no. 1, pp. 12-19, 2014.
[30]. Xuxing Chen, Rong Li, Xiaoyang Pan, Xintang Huang, Zhiguo Yi, "Fabrication of In2O3-Ag-Ag3PO4 composites with Z-scheme configuration for photocatalytic ethylene degradation under visible light irradiation," Chemical Engineering Journal, vol. 320, pp. 644-652, 2017.
[31]. Dongguan Fan, Xiaomei Zhang, Jing Luo, Huiping Peng, Hui Lin, Minchen Bao, Liang Hong, Jinjin Zhou, "Rapid synthesis of Ag/AgCl@ZIF-8 as a highly efficient photocatalyst for degradation of acetaminophen under visible light," Chemistry Engineering Journal, vol. 351, pp. 782-790, 2018.
[32]. Jianjun Zhou, Haiwen Zhu, Guangqiang Cao, Jiecheng Zhang, Jianlin Peng, Hattan Banjar, Hong-Quan Zhang, "A New Mechanistic Model to Predict Boosting Pressure of Electrical Submersible Pumps ESPs Under High-Viscosity Fluid Flow with Validations by Experimental Data", Conference of SPE Gulf Coast Section Electric Submersible Pumps Symposium, Society of Petroleum Engineers, 2019.
