RESEARCH ON EFFECTS OF A MOUNTING MECHANISM ON DEFORMATION OF A MAIN MIRROR IN THE IFRARED COLLIMATOR

123 views

Authors

DOI:

https://doi.org/10.54939/1859-1043.j.mst.75.2021.126-132

Keywords:

Deformation of mirrors; Mirror mounting mechanism.

Abstract

In the infrared collimator used to measure, the main mirror plays a very important role, that decides the accuracy of the outgoing beam. The mirror surface must be machined with high precision, the mechanical mechanisms holding the mirror must ensure that the working surface of the mirror is not significantly deformed. In this paper, we used the finite element method to investigate the impact of mechanical parts on deformation of optical components. Since then, solutions have been proposed to minimize the impact of clamping forces on optical components. When applying these solutions, we have successfully designed and fabricated the main mirror assembly of the infrared collimator with high accuracy, experimental results show that the collimator works correctly, wavefront aberration of 0.044l is sufficient to test thermal imaging lenses operating in the 8-12 mm spectral region.

References

[1]. V.A. Panov, “Microscopy optics, 1976”.

[2]. K. Chrzanowski, “Evaluation of infrared collimators for testing thermal imaging systems”, Opto-electron, Rev. 15, No. 2, 2007;

[3]. Le Duy Tuan, Tran Anh Quang, Le Hoang Hai, “Design and manufacture of an ir-collimator used to test thermal imaging lenses working in the spectral region of 8÷12 µm”, The 11th International Conference on Photonics & Applications, 2021.

[4]. Gerhard Schwesinger, “Optical effect of flexure in vertically mounted precision mirrors”, 1954.

[5]. A. J. Malvick, “Theoretical elastic deformations of the Steward Observatory 230-cm and the Science Center 154-cm mirrors”, 1972.

[6]. Alson E. Hatheway, “Finite element methods for evaluating optical system performance”, 1984.

[7]. Xu Rongwei, Liu Liren, Luan Zhu, Liu Hongzhan, “Support schemes and thermal effects analyses of large-aperture interferometer mirrors”, 2004.

[8]. Chia-Yen Chan, Zhen-Ting You, Ting-Ming Huang, Yi-Cheng Chen, Fong-Zhi Chen, “Analysis and experimental investigation for collimator reflective mirror surface deformation adjustment”, 2017.

[9]. Singiresu S. Rao, “The Finite Element Method in Engineering, 4lh Edition, Elsevier Science & Technology Books”, 2004.

[10]. Erdogan Madenci and Ibrahim Guven, “The Finite Element Method and applications in Engineering using ANSYS”, Springer, 2006.

[11]. Paul R. Yoder. Jr, “Opto-Mechanical Systems Design Third Edition”, 2006.

[12]. Под общ. ред. В. А. Панова, “Справочник конструктора оптико-механических приборов”, Панов В.А., Кругер М.Я., Кулагин В.В. и др; Третье издание переработанное и дополненное – Л.: Машиностроение, Ленинградское отделение, 1980.

[13]. Lê Duy Tuấn, Nguyễn Hồng Ngọc, “Giáo trình công nghệ gia công chi tiết quang học”, NXB QĐND, 2018.

Published

10-10-2021

How to Cite

Tuấn. “RESEARCH ON EFFECTS OF A MOUNTING MECHANISM ON DEFORMATION OF A MAIN MIRROR IN THE IFRARED COLLIMATOR”. Journal of Military Science and Technology, no. 75, Oct. 2021, pp. 126-32, doi:10.54939/1859-1043.j.mst.75.2021.126-132.

Issue

Section

Research Articles

Most read articles by the same author(s)

1 2 > >>