Studying the resistance to fluorescent UV-condensation exposures of nano coating on natural rubber

149 views

Authors

  • Nguyen Manh Tuong Institute of Chemistry and Materials, Academy of Military Science and Technology
  • Ngo Van Hoanh Institute of Chemistry and Materials, Academy of Military Science and Technology
  • Nguyen Thi Hoa Institute of Chemistry and Materials, Academy of Military Science and Technology
  • Nguyen Van Canh Institute of Chemistry and Materials, Academy of Military Science and Technology
  • Ho Ngoc Minh (Corresponding Author) Institute of Chemistry and Materials, Academy of Military Science and Technology

DOI:

https://doi.org/10.54939/1859-1043.j.mst.97.2024.90-95

Keywords:

Nano coating; Natural rubber; UV aging tests; Mechanical strength; Surface structure.

Abstract

 Rubber materials are often destroyed and reduced durability by the impact of environmental factors such as: ozone, oxygen, heat, UV rays.... This article has researched the anti-aging ability of nano coatings DDN-01 for natural rubber under fluorescent uv-condensation exposures. With the protection of the coating, after 20 radiation-heat-humidity acceleration cycles, the tensile strength of rubber remains higher than 84% and maintains a stable surface structure. This research opens up broad application possibilities of nano solutions to protecting and improving the durability of rubber and non-metallic materials.

References

[1]. Zhang Zhe, et al, “Effects of thermal aging on uniaxial ratcheting behavior of vulcanised natural rubber”, Polymer Testing, Vol. 70, pp. 102-110, (2018).

[2]. Wei YanChan, et al, “The role of non-rubber components acting as endogenous antioxidants on thermal-oxidative aging behavior of natural rubber”, Polymer Testing, Vol. 111, pp. 107614, (2022).

[3]. Tertyshnaya, et al, “Impact of water and UV irradiation on nonwoven polylactide/natural rubber fiber”, Polymers, Vol 13, No. 3, pp. 461, (2021).

[4]. Đỗ Đình Trung, Nguyễn Ngọc Tuệ, Nguyễn Minh Việt, Tạ Thu Trang, Tạ Kiên Cường, Hà Minh Ngọc, Nguyễn Thị Hồng Ngọc, “Một số kết quả nghiên cứu độ bền vật liệu polymer phủ dung dịch nanoprotech bằng phương pháp thử nghiệm gia tốc”, Tạp chí Khoa học Công nghệ Hàng hải, số 68, pp. 49-52, (2021).

[5]. Nguyễn Mạnh Tường, Nguyễn Thị Hòa, Nguyễn Trần Hùng, Nguyễn Văn Cành, “Nghiên cứu chế tạo dung dịch nano ứng dụng trong bảo quản lốp”, TC Nghiên cứu KHCNQS, số Đặc san 10 (2015).

[6]. Firoozeh Danafar, and Maryam Kalantari, “A Review of Natural Rubber Nanocomposites Based on Carbon Nanotubes”, J. Rubb. Res., Vol. 21, No. 4, pp. 293-310, (2018).

[7]. A. De Falco, et al, “Accelerator Adsorption onto Carbon Nanotubes Surface Affects the Vulcanization Process of Styrene-Butadiene Rubber Composites”, Journal of Applied Polymer Science, Vol. 113, pp. 2851-2857, (2009).

[8]. Nguyễn Đức Mạnh, Nghiêm Thị Thương, “Nghiên cứu cấu trúc và tính chất của cao su thiên nhiên epoxy hóa lỏng”, Tạp chí Khoa học và Công nghệ, Số 145, pp. 113-117, (2020).

[9]. Zhou MengZhen, et al, “Synergistic effect of thermal oxygen and UV aging on natural rubber”, e-Polymers, Vol. 23, No. 1, pp. 20230016, (2023).

Published

25-08-2024

How to Cite

Nguyễn Mạnh Tường, V. H. Ngô, Nguyễn Thị Hòa, Nguyễn Văn Cành, and Hồ Ngọc Minh. “Studying the Resistance to Fluorescent UV-Condensation Exposures of Nano Coating on Natural Rubber”. Journal of Military Science and Technology, vol. 97, no. 97, Aug. 2024, pp. 90-95, doi:10.54939/1859-1043.j.mst.97.2024.90-95.

Issue

Section

Chemistry, Biology & Environment

Categories

Most read articles by the same author(s)