THE EFFECTS OF ROTOR POLE ARCS, TURN_ON ANGLE ON TORQUE CHARACTERISTIC AND TORQUE RIPPLE OF SWITCHED RELUCTANCE MOTOR
158 viewsKeywords:
Switched Reluctance Motor; Torque characteristic; Average torque; Torque ripple; Turn_on angle; Rotor pole arcs.Abstract
Switched Reluctance Motors have inherent advantages such as simple structure with non winding construction in rotor side, with no permanent magnet in the rotor, and possible operation in high speed. The high torque production in switched reluctance motor comes from the tendency of the rotor poles to align with the excited stator poles. SRM can operate in the whole magnetic circuit saturation region, thus making the most of the ferromagnetic material's capabilities, power density per mass of the SRM. However, because SRM construction with doubly salient poles and its non-linear magnetic characteristics, the problems of acoustic noise and torque ripple are more severe than these of other traditional motors. Reducing torque ripple and maximizing average torque are one of the important goals of designing the SRM. Rotor pole arc is a parameter has a great influence on the average torque and the turn_on angle phase current is a decisive factor in the torque generation process. In the paper, the author analyzes the influence of turn_on angle on torque characteristics, the relationship of stator/rotor pole arc with turn_on angle phase current. The finite element method, software Speed PC-SRD was employed to caculate and analysis with switched reluctance motors 6/4-30kW. The results are essential basis for the designing driver of switched reluctance motor.
References
[1]. R. Krishnan, Switched reluctance motor drives: Modeling, simulation, analysis, design, and applications. 2017.
[2]. T. Wichert, “Design and construction modifications of switched reluctance machines,” p. 161, 2008.
[3]. A. Tap, L. Xheladini, T. Asan, M. Imeryuz, M. Yilmaz, and L. T. Ergene, “Effects of the rotor design parameters on the torque production of a PMaSynRM for washing machine applications,” Proceedings - 2017 International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2017 and 2017 Intl Aegean Conference on Electrical Machines and Power Electronics, ACEMP 2017, pp. 370–375, 2017, doi: 10.1109/OPTIM.2017.7974998.
[4]. J. Choi, T. H. Kim, K. Jang, and J. Lee, “Geometric and Electrical Optimization Design of SR Motor Based on Progressive Quadratic Response Surface Method,” vol. 39, no. 5, pp. 3241–3243, 2003.
[5]. S. RISSE and G. HENNEBERGER, “Design and optimization of a Switched Reluctance motor for electric vehicle propulsion,” pp. 1526–1530, 2016, [Online]. Available: http://cat.inist.fr/?aModele=afficheN&cpsidt=14174377.
[6]. V. Rallabandi, J. Wu, P. Zhou, D. G. Dorrell, and D. M. Ionel, “Optimal Design of a Switched Reluctance Motor with Magnetically Disconnected Rotor Modules Using a Design of Experiments Differential Evolution FEA-Based Method,” IEEE Transactions on Magnetics, vol. 54, no. 11, pp. 1–5, 2018, doi: 10.1109/TMAG.2018.2850744.
[7]. M. D. Bui, S. Schneider, S. Arnaout, and U. Schaefer, “Torque maximization of a high-speed switched reluctance starter in acceleration test,” 2013 15th European Conference on Power Electronics and Applications, EPE 2013, no. 1, pp. 1–5, 2013, doi: 10.1109/EPE.2013.6631908.
[8]. S. Smaka, M. Cosovic, and S. Masic, “The effects of magnetic circuit geometry on torque generation of 8/14 switched reluctance machine,” 2013 24th International Conference on Information, Communication and Automation Technologies, ICAT 2013, pp. 1427–1432, 2013, doi: 10.1109/ICAT.2013.6684050.
[9]. B. Nguyen and C. Ta, “Finite Element Analysis , Modeling and Torque Distribution Control for Switched Reluctance Motors with High Non-linear Inductance Characteristics,” pp. 693–698, 2011.
[10]. L. Q. Dũng, “TORQUE-RIPPLE MINIMIZATION IN SWITCHED RELUCTANCE MOTORS,” pp. 1–9, 2014.
